SNAP CLIP - FABRIC COVERED BUTTON INSTRUCTIONS

Jackobindi in front of a baby pink and baby blue button

SNAP CLIP - FABRIC COVERED BUTTON INSTRUCTIONS
  1. Place template on fabric, print side up. Trace around clear template after positioning the print you require in the middle window of the template. Cut around your circle. (remove protective paper if you want a clear template.
  2. Turn over print side of fabric circle so it is positioned down and put on top of base (ensure any fabric which has a print you want centred is positioned in middle of base)
  3. Place aluminium button shell over fabric and push into the tool base.
  4. When you have ensured the fabric is in the correct position, fold edges of fabric into middle of button, using sharp scissors trim excess fabric if need be, (ensuring there is enough fabric to fold in, but not too much that the back/clip wont snap in)
  5. Make sure no fabric is hanging out, place button back with attached snap clip into shell No need to use the blue pusher, you can push using your thumb until the snap clip “pops” into place. Button/clip is complete!! Well done!! Please note the clip goes in on a bit of an angle, if it doesn’t “pop” its not in securely
  6. Repeat steps 1-6 for all buttons/clip supplied.
  7. You now have made your own button hair clips, easy wasn’t it??!! All items in kit can now be purchased separately in store. You will not need to buy another tool or template, these can be used multiple times.